Tap190-G Tapping Mode AFM Probe with Long Cantilever


Order
Request an official quote (RFQ)
Order Code / Price*
Quantity
Tap190-G-10 (10 per set)
1 x 200.00 USD = 200.00 USD
Add to Basket
Tap190-G-50 (50 per set)
1 x 850.00 USD = 850.00 USD
Add to Basket
Tap190-G-380 (380 per set)
1 x 4 500.00 USD = 4 500.00 USD
Add to Basket
* Does not include VAT or customs duties.

AFM Probe Specifications:

AFM Tip

Shape
Rotated
Height
17 µm
(15 - 19 µm)*
Setback
15 µm
(10 - 20 µm)*
Radius
10 nm
Half Cone Angle
20°-25° along cantilever axis, 25°-30° from side, 10° at the apex

AFM Cantilever

Cantilever A
Beam
48 N/m (28 - 75 N/m)*
190 kHz (160 - 220 kHz)*
225 µm (215 - 235 µm)*
38 µm (33 - 43 µm)*
7 µm (6 - 8 µm)*
* typical range

Coating

Uncoated

Alignment Grooves

This product features alignment grooves on the back side of the holder chip.

Additional Info

Monolithic silicon AFM probe for high frequency non-contact and tapping mode operation.

The rotated AFM tip allows for more symmetric representation of high sample features. The consistent AFM tip radius ensures good resolution and reproducibility.

The AFM holder chip fits most commercial AFM systems as it is industry standard size.

BudgetSensors' Tap190-G features a longer AFM cantilever and it is meant as an alternative to BudgetSensors' Tap300 AFM probes series, when the feedback loop of the AFM system does not accept high frequencies (400 kHz) or when the detection system needs a minimum AFM cantilever length > 125 µm. The scanning speed of Tap190 series AFM probes is slightly slower than the scanning speed of the Tap300 series.

For measurements in liquids please use the back side gold coated Tap190GD-G or the overall gold coated Tap190GB-G!

Loading