BudgetSensors AFM Probes
english | español |
sitemap home
AFM Probe Tip
Quality AFM Probes
home news products distributors gallery downloads contact us
BudgetSensors's AFM probes on-line shop
AFM probes for Tapping Mode, Intermittent Contact Mode
Force Modulation AFM probes
AFM probes for Contact Mode
Conductive AFM probes
Silicon Nitride AFM probes
Gold Coated AFM probes
Magnetic AFM probes
DLC Probes
All-In-One Probes
Calibration Standards
Silicon Nitride AFM probes
AFM probe All-In-One Order Online: AFM probe Model SiNi
AFM probe All-In-One

AFM Probe Model: All-In-One


Several Measurement Modes


Rotated Monolithic Silicon Probe
Symmetric Tip Shape
Chipsize: 3.4 x 1.6 x 0.3 mm

  coating:  none

This probe uses “on scan angle” symmetric tips to provide
a more symmetric representation of features over 200 nm.

All-In-OneThe All-in-One probes offer four cantilevers with different geometry for all topography measurement modes: contact mode, force modulation, soft tapping and tapping mode. The resonance frequencies and force constants are similar to the ones of the well-established models Contact, Multi75, Tap150 and Tap300.

The long cantilevers A for contact mode and B for force modulation are located at one end of the chip while the short cantilevers C for soft tapping and D for tapping mode are located at the opposite end. The short cantilever end is marked by a trapezoidal pattern visible with bare eyes.

Cantilever Application Similar to Short specs
(typical values)
A Contact Mode Contact Res. Frequency:
15 kHz
Force Constant:
0.2 N/m
B Force modulation, Pulsed Force Mode Multi75 Res. Frequency:
80 kHz
Force Constant:
2.7 N/m
C Soft Tapping Mode, Intermittent Contact-Mode Tap150-G Res. Frequency:
150 kHz
Force Constant:
7.4 N/m
D Tapping Mode, Intermittent Contact-Mode Tap300 Res. Frequency:
350 kHz
Force Constant:
40 N/m
2007 © BudgetSensors, made by ISB Web division Part of NanoWorld Group